- 產品分類
- 品牌分類
- (美國)NIST SRM
- (美國)ChemService
- (美國)J.T.Baker
- (德國)La-Pha-Pack
- (美國)Agilent(Varian)
- (美國)PerkinElmer
- (美國)Thermo
- KRLAB
- (美國)AccuStandard
- (美國)SPEX CertiPrep
- (美國)ChromaDex
- (德國)IRMM/ERM
- (意大利)Milestone
- 上海屹堯
- (德國)Dr.Ehrenstorfer
- (日本)雅馬拓科學
- (美國)PG公司
- (英國)Whatman
- Glass Expansion
- LabGenius
- (德國)Merck
- (法國)CPAchem
- IL
- VWR Avantor
- Micro Essential
- LGC
- RBS
- (加拿大)Burgener
- (日本)Shimadzu
- (美國)Waters
- (美國)Dionex
- 上海亞榮
- 上海一恒
- (德國)Sigma-Aldrich
- (美國)Strem
- (德國)Sartorius
- (芬蘭)百得Biohit
- (德國)Neochema
- 上海精宏
- (美國)LabTech
- (廣州)勝譜SISP
- (德國)依芝奧E.G.O
- (意大利)Kartell
- (美國)Millipore
- (德國)Elma
- (德國)Julabo
- 上海田楓
- Wellington
- (德國)Brand
推薦產品
J.T.Baker高純硝酸(9761-80)
CRM-PE001鄰苯二甲酸酯固態標樣
四乙基硼酸鈉 11-0575
1-10種PBDE多溴聯苯醚混標S-15497-10X
ICP-MS加標樣用泵管 12根/包
ICP等離子及輔助氣管
ICP石英炬管 對應貨號：2010090400
ICP-MS玻璃霧化器
ICP高鹽霧化器(2010096400/AR30-07-FSS2E)
ICP霧化室 對應貨號:2010081700
ICP-MS稀釋連接桿（Quartz connector tube, dilution, HMI kit）
ICP-MS鎳截取錐 對應貨號：G3280-67041
ICP-MS采樣鎳錐G3280-67040
當前位置： 首頁 > 產品展示 > ICP&ICP-MS配件 > ICP|ICP-MS|AA霧化器 > ICP-MS玻璃霧化器
ICP-MS玻璃霧化器
- 產品名稱：ICP-MS玻璃霧化器
- 型號規格：G3266-65003
- 產品貨號：GP000244
- 市場價格：0
- 品牌分類：(美國)Agilent(Varian)
- 商品介紹
MicroMist nebulizer (Glass), 1/pk
Standard on 7700x/e and 7500cx/ce.
When ordered for the 7500a, the spray chamber
Standard on 7700x/e and 7500cx/ce.
When ordered for the 7500a, the spray chamber
- 規格參數
| scription | Specifications | Use | Unit |
7700 Part No. |
7500 Part No. |
| MicroMist Nebulizer | Borosilicate glass |
Standard on 7700x/e and 7500cx/ce. When ordered for the 7500a, the spray chamber end cap (G1833-65475) is also required. |
G3266-65003 | G3266-65003 | |
| Sample tubing |
0.25 mm ID, 700 mm, with connector |
For MicroMist Nebulizer | 10/pk | G3266-80010 | G3266-80010 |
| Sample tubing |
0.5 mm ID, 700 mm, with connector |
For MicroMist Nebulizer | 10/pk | G3266-80011 | G3266-80011 |
| Carrier gas connector | For MicroMist Nebulizer | G3266-80015 | G3266-80015 | ||
| Nebulizer cleaner | For MicroMist Nebulizer | G3266-80020 | G3266-80020 | ||
| MicroFlow Nebulizer | PFA, 200 μL/min | G3139-65100 | G3139-65100 | ||
|
MicroFlow Nebulizer with I-AS probe |
PFA, 200 μL/min | Standard on 7700s and 7500s | G3139-65102 | G3139-65102 | |
| MicroFlow Nebulizer | PFA, 20-50 μL/min | G3139-65106 | G3139-65106 | ||
|
MicroFlow Nebulizer with I-AS probe |
PFA, 20-50 μL/min | G3139-65108 | G3139-65108 | ||
| Carrier gas line connector | For MicroFlow Nebulizer | 2/pk | G1833-65583 | G1833-65583 | |
| Mira Mist Nebulizer | PTFE | G3161-80000 | G3161-80000 | ||
| Mira Mist Nebulizer | PEEK |
For high solids applications such as environmental, geological, etc. Not for semiconductor use since it does not self aspirate. When ordered for the 7500a, the spray chamber end cap (G1833-65475) is also required (included with 7500cx/cs). |
G3161-80001 | G3161-80001 | |
| Babington Nebulizer |
Includes Viton O-ring, PTFE sample tubing, and connector |
Use to introduce samples with high matrix and high total salts. Clean when contaminated or when orifices are clogged. |
G1820-60453 | ||
|
End cap for Babington Nebulizer, polypropylene |
Includes Viton O-rings |
Replace when memory effects do not disappear after cleaning. Insert nebulizer in middle of end cap all the way through. Attach end cap to spray chamber with "TOP" mark facing up. |
G1833-65476 | ||
|
Babington Nebulizer removal tool |
G1820-65345 | ||||
|
Concentric Nebulizer, Pyrex |
Use with P/N G1820-65052 Argon gas connector, P/N G1820-60160 Connector kit, P/N G1820-65121 end cap |
Use with clean samples only. Not resistant to hydrochloric acid. Clean with a 5% HNO3 (v/v) bath; do not use ultrasonic bath. |
G1820-65030 | G1820-65030 | |
|
Concentric Nebulizer, quartz |
Use with P/N G1820-65337 Quartz spray chamber, P/N G1820-80237 Quartz connecting pipe |
Recommended for trace analysis of clean samples. Lower contamination level than Pyrex. Clean using 5% HNO3 (v/v) bath; do not use ultrasonic bath. |
G1820-65138 | G1820-65138 | |
|
Connector for carrier gas line, polypropylene |
4 mm tubing, includes ferrule and O-ring |
For gas line connection to Concentric Nebulizer | G1820-65052 | G1820-65052 | |
|
Sample tubing with connector, PTFE |
Tool included |
For Babington Nebulizer, replace when heavily contaminated by high matrix samples. |
G1820-65276 | ||
| Sample line connector | Includes Viton O-ring |
Connects Concentric Nebulizer with sample line. Port with large hole connects to nebulizer; smaller port connects with sample tubing. |
G1820-60160 | G1820-60160 | |
| Union fitting | 4 mm tubing | For PFA Concentric Nebulizer | 5064-8078 | 5064-8078 | |
|
Ferrule and Viton O-ring kit for carrier gas line connector |
For Babington/Concentric Nebulizer | G1820-65533 | G1820-65533 | ||
|
End cap for Concentric Nebulizer, PTFE |
Includes Viton O-rings |
Connects the Concentric Nebulizer (Pyrex or Quartz) with the spray chamber. For MicroMist, MicroFlow, and other concentric nebulizers. |
G1833-65475 | ||
|
O-rings for Babington Nebulizer, Viton |
Used to create seal between Babington Nebulizer and end cap. |
4/pk | G1820-65199 | ||
|
O-ring kit for Concentric Nebulizer, Viton |
2 sizes, 10 each | 20/pk | G1820-65491 | G1820-65491 | |
|
O-rings for Concentric Nebulizer, for organic solvents (3 types) |
4/pk | G1820-65520 | G1820-65520 | ||
| O-rings for end cap, Viton |
Use for the end cap of the Babington Nebulizer, Cross Flow Nebulizer and Concentric Nebulizer. |
5/pk | G1820-65198 | ||
|
O-rings for end cap, for organic solvents |
2/pk | G1820-65518 | |||
| CrossFlow Nebulizer |
Includes bushing, carrier gas line connector, blend gas line connector, sample tubing, and gas line tubings with inner sleeves |
Standard nebulizer for the inert kit. Resistant to hydrofluoric acid. Set carrier gas pressure to 500 kPa (5 kg/cm2). Clean with 5% HNO3 (v/v) bath. Replace when memory effects remain after cleaning. |
G1833-65462 |
